New method for analysing spatial relationships of facial muscles on MRI: a pilot study.

Dysfunction of the facial musculature can have significant physical, social, and psychological consequences. In surgeries such as cleft surgery or craniofacial bimaxillary osteotomies, the perioral facial muscles may be detached or severed, potentially altering their functional vectors and mimicry capabilities. Ensuring correct reconstruction and maintenance of anatomical sites and muscle vectors is crucial in these procedures. However, a standardized method for perioperative assessment of the facial musculature and function is currently lacking. The aim of this study was to develop a workflow to analyse the three-dimensional vectors of the facial musculature using magnetic resonance imaging (MRI) scans. A protocol for localizing the origins and insertions of these muscles was established. The protocol was implemented using the 3DMedX computer program and tested on 7 Tesla MRI scans obtained from 10 healthy volunteers. Inter- and intra-observer variability were assessed to validate the protocol. The absolute intra-observer variability was 2.6 mm (standard deviation 2.0 mm), and absolute inter-observer variability was 2.6 mm (standard deviation 1.5 mm). This study presents a reliable and reproducible method for analysing the spatial relationships and functional significance of the facial muscles. The workflow developed facilitates perioperative assessment of the facial musculature, potentially aiding clinicians in surgical planning and potentially enhancing the outcomes of midface surgery.

Kern's six-step approach allows for meaningful implementation of an orthognathic surgery training course.

OBJECTIVES: This study investigated the effectiveness of simulation training in improving the confidence and competency of oral and maxillofacial surgery (OMS) residents in performing orthognathic surgery (OGS). METHODS: Kern's six-step approach was applied when designing the simulation training for OMS residents. The difficulties encountered by the residents when learning OGS were considered when designing the training program. A training course consisting of didactic sessions, hands-on training on three-dimensional training models, and an assessment tool was implemented for OMS residents. Improvement in the confidence and competence of OMS residents in performing OGS, fidelity of the three-dimensional models, and satisfaction with the course was evaluated. RESULTS: All OMS residents (10/10) completed the course. The perceived difficulty in learning OGS was mainly related to the manipulation of the jawbones. While there were improvements in the median confidence and competence scores (3/5 to 4/5), only the differences in competence were found to be statistically significant (p < 0.01, Wilcoxon signed-rank test). Improvements in confidence and competence did not correlate. The mean fidelity scores of both the maxillary and mandibular models were adequate at 3.2 out of 5. Overall, satisfaction with the course was high (5/5). CONCLUSIONS: The six-step approach provides a guided process for educators to formulate a training course directed toward the perceived needs of students. Targeted training can significantly enhance the students' competence. Greater efforts should also be put in place to allow simultaneous developments in the students' confidence along with their competence.

Evaluation of Surface Changes of Stainless Steel Miniplates and Screws Following Retrieval from Maxillofacial Trauma and Orthognathic Surgery Patients: A Comparative Study.

Background: This study examines the surface changes of stainless steel miniplates and screws after their retrieval from patients who underwent maxillofacial trauma and orthognathic surgery. The assessment focuses on comparing the alterations in these materials, aiming to contribute to our understanding of their durability and performance in clinical settings. Materials and Methods: A total of 60 stainless steel miniplates and screws were collected from 30 patients who had previously undergone either maxillofacial trauma or orthognathic surgery. The retrieved miniplates and screws were carefully removed from the patients and cleaned to remove any organic debris. Each specimen was then examined for surface changes. Surface changes were evaluated using visual inspection, scanning electron microscopy (SEM), and roughness measurements. Visual inspection provided a qualitative assessment, while SEM allowed for a more detailed examination of the surfaces. Roughness measurements were conducted using a profilometer. Results: Visual inspection revealed varying degrees of surface changes in the retrieved miniplates and screws. These changes included scratches, corrosion, and discoloration. SEM analysis confirmed the presence of surface alterations, with some specimens showing more significant damage, such as pitting and cracks. Roughness measurements indicated an increase in surface roughness for both miniplates and screws, suggesting that the surfaces had become less smooth. Conclusion: This comparative study of stainless steel miniplates and screws retrieved from maxillofacial trauma and orthognathic surgery patients demonstrated that these materials undergo surface changes over time.

Assessment of Patient Satisfaction and Functional Outcomes in Orthognathic Surgery.

Background: Orthognathic surgery is a surgical procedure performed to correct severe jaw misalignments that can affect a patient's facial aesthetics and functional occlusion. While the primary goal of orthognathic surgery is to improve functional outcomes and facial appearance, it is essential to assess patient satisfaction as a crucial aspect of overall treatment success. Materials and Methods: Patient selection: We conducted a prospective study involving 50 patients who underwent orthognathic surgery. All patients had a confirmed diagnosis of severe jaw misalignment, as determined by clinical and radiographic assessments. The surgical procedures performed included maxillary advancement, mandibular setback, or a combination of both, depending on the patient's specific diagnosis. Preoperative orthodontic treatment was provided to align the teeth and prepare the patient for surgery. Patients were evaluated preoperatively and at postoperative intervals of 3 months, 6 months, and 1 year. Results: Patient satisfaction scores and functional outcomes were as follows: aesthetics of facial profile (1-year post-op): mean score = 4.6, chewing function (1-year post-op): mean score = 4.4, speech function (1-year post-op): mean score = 4.3, and overall satisfaction with surgical outcome (1-year post-op): mean score = 4.5. Objective assessments revealed a significant improvement in occlusion and facial aesthetics. The mean reduction in overjet was 4.8 mm, and the mean reduction in overbite was 3.2 mm. Additionally, the mean postoperative ANB angle improved by 3.7°, indicating a better facial balance. Conclusion: Orthognathic surgery in our cohort of 50 patients resulted in high levels of patient satisfaction with both functional outcomes and facial aesthetics. Objective measurements also indicated significant improvements in occlusion and facial balance.

Establishment of the mid-sagittal reference plane for three-dimensional assessment of facial asymmetry: a systematic review : Establishment of the mid-sagittal reference plane: a systematic review.

OBJECTIVE: To systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry. MATERIALS AND METHODS: Six electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively. RESULTS: The preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be 'low'. The level of evidence was determined to be 'low' for the effectiveness of the technique and 'moderate' for the ease of clinical applicability. CONCLUSION: Despite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required. CLINICAL RELEVANCE: The present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes.

Virtual Versus Conventional Planning in Orthognathic Surgery: A Systematic Review and Meta-analysis.

Objectives: The purpose of this study was to compare the accuracy of hard tissues movements planned to result of the maxillary and mandibular positions between conventional surgical planning (CSP) and virtual surgical planning (VSP) in patients undergoing orthognathic surgery. Methods: A systematic electronic search was carried out in six databases and gray literature with no restriction of publication date and language. Clinical observational studies that compared accuracy of maxillary position between CSP and VSP were included. Linear measurements of the mandible in the transverse plane and linear measurements of the maxilla in the vertical, horizontal and transverse planes were considered for analysis, comparing planned to postoperative outcomes of CSP and VSP. Cochrane tool was used to assess bias risk. A meta-analysis was performed to summarize similar results by using the Review Manager 5.3 software. Significance level was set at 5%. Results: Six studies (2 RCT and 4 retrospective cohorts) were included according to inclusion and eligibility criteria, involving 255 patients. The inter-rater reliability of selection and eligibility was excellent (k = 0.8315 and k = 0.9329, respectively). Two studies presented that VSP seemed to have better results than CSP regarding linear measurements of the mandible in the transverse plane. Results from CSP and VSP were similar in accuracy for hard tissue in vertical plane of maxillary position (I2 = 0%; p = 0.17), although VSP was more accurate in horizontal plane (I2 = 0%; p = 0.02). Conclusion: VSP presented better accuracy for transverse movements in mandible of asymmetric patients. VSP showed to be more accurate for movements in the horizontal plane, and qualitative analysis seemed to be more effective for transverse movements.

Male-to-female transgenders demonstrated unique perspectives on perceived facial attractiveness and orthognathic surgery need.

PURPOSE: The esthetic preference and decision concerning undergoing orthognathic surgery in the transgender population have not been reported. The aims of this study were to examine the influence of the sagittal mandibular position on the esthetic perception and perceived surgery need in male-to-female transgenders (MTFTs) compared with male and female laypeople. MATERIALS AND METHODS: A questionnaire study was performed by male-to-female transgender, male and female laypeople. Three-dimensional black & white male and female facial images with facial contour angle (FCA) of 3°, 1°, 5°, 9°,13°, 17°, and 21° were shown to the participants. The participants scored the images' perceived facial attractiveness using visual analog scales (VAS) and indicated whether orthognathic surgery was needed. RESULTS: The participants included 85 MTFTs, 85 males, and 85 females. The results revealed that there were significant differences in the VAS scores between the MTFT and male participants. The MTFTs rated the male images with prognathism of 1° and -3°FCA in significantly lower scores compared with the males (P = 0.033, P = 0.010). Female images with prognathism 1°FCA was rated by the MTFTs in significantly lower scores compared with the males (P = 0.041). A significantly higher number of surgery needs was found in the MTFTs compared with the other groups. CONCLUSIONS: Gender influences esthetic perception and the decision to undergo orthognathic surgery. MTFTs have a unique perspective on facial esthetics, being more desirous of surgery than males and females. Clinicians should be aware of the ideal expectation in facial esthetics in MTFTs.

Change in taste sensation after orthognathic surgery.

OBJECTIVE: The objective of this study was to evaluate the effect of orthognathic surgery on taste sensation. MATERIALS AND METHODS: Thirty-five patients scheduled to undergo Le Fort I osteotomy (LFIO), sagittal split ramus osteotomy (SSRO), and bimaxillary surgery (BMS) were evaluated by administering localized and whole-mouth taste tests preoperatively and postoperatively at months 1, 3, and 6. The patients were asked to identify the quality of four basic tastes applied to six locations on the palate and tongue and to rate the taste intensities they perceived. Taste recognition thresholds and taste intesity scores were evaluted according to operation groups and follow-ups. RESULTS: There were significant decreases in the quinine HCl recognition thresholds at the postoperative follow-ups compared to the preoperative in LFIO patients (p = 0.043). There were significant decreases in sucrose taste intensity scores in the right posterolateral part of the tongue at months 3 and 6 compared to preoperative in SSRO patients (p = 0.046), and significant increases in quinine HCL taste intensity scores in the right and left anterior parts of the tongue at month 6 compared to preoperative in LFIO patients (p < 0.05). CONCLUSION: Taste perception is affected due to potential damage to the chemosensory nerves during orthognathic surgical procedures. Generally, non-significant alterations have been observed in taste perception after orthognathic surgery, except for significant alterations in bitter and sweet taste perceptions. CLINICAL RELEVANCE: Maxillofacial surgeons should be aware of taste perception change after orthognathic surgery procedures and patients should be informed accordingly. THE TRIAL REGISTRATION NUMBER (TRN): NCT06103422/Date of registration: 10.17.2023 (retrospectively registered).

Evaluation of pre- and postoperative nutrition and oral health-related quality of life in orthognathic surgery patients.

OBJECTIVE: Orthognathic surgery is a complex orofacial surgery that can significantly impact occlusal function and effect nutritional and quality of life parameters. This study aimed to evaluate alterations in dietary intake, chewing function, physical activity, and oral health-related quality of life of patients undergoing orthognathic surgery. RESEARCH METHODS AND PROCEDURES: In this prospective longitudinal study, the assessments were conducted at: preoperatively (T0) and postoperative first week (T1), second week (T2), first month (T3), and third month (T4) between May 2021 and March 2023. Sociodemographic questionnaire, 24-h dietary recall record, chewing ability form, International Physical Activity Questionnaire, and Oral Health Impact Profile-14 (OHIP-14) was applied at face-to-face interviews. RESULTS: Seventy eligible orthognathic surgery patients were evaluated, and 37 patients (52.8%) completed this study. Energy and fat intake significantly decreased from T0 to T1 (P < 0.001) and returned to basis by T4 (P = 0.015). Fiber intake was found to be lowest at T1 and T2 compared with other time points (P < 0.001). Chewing ability showed a deterioration and then improvement; however, patients still had difficulties chewing hard foods at T4. The OHIP-14 increased at T2 and T3 from T0 (P < 0.001 and P = 0.021, respectively) and showed a significant improvement at T4 (P < 0.05). CONCLUSION: The findings indicate a temporary decline in nutritional intake and chewing ability with subsequent recovery by the third month postsurgery. These changes, along with the trends in oral health-related quality of life, underscore the need for tailored nutritional and functional rehabilitation programs following orthognathic surgery.

The butterfly effect in oral and maxillofacial surgery: Understanding and applying chaos theory and complex systems principles.

The present paper provides a historical context for chaos theory, originating in the 1960s with Edward Norton Lorenz's efforts to predict weather patterns. It introduces chaos theory, fractal geometry, nonlinear dynamics, and the butterfly effect, highlighting their exploration of complex systems. The authors aim to bridge the gap between chaos theory and oral and maxillofacial surgery (OMFS) through a literature review, exploring its applications and emphasizing the prevention of minor deviations in OMFS to avoid significant consequences. A comprehensive literature review was conducted on PubMed, Web of Science, and Google Scholar databases. The selection process adhered to the PRISMA-ScR guidelines and Leiden Manifesto principles. Articles focusing on chaos theory principles in health sciences, published in the last two decades, were included. The review encompassed 37 articles after screening 386 works. It revealed applications in outcome variation, surgical planning, simulations, decision-making, and emerging technologies. Potential applications include predicting infections, malignancies, dental fractures, and improving decision-making through disease prediction systems. Emerging technologies, despite criticisms, indicate advancements in AI integration, contributing to enhanced diagnostic accuracy and personalized treatment strategies. Chaos theory, a distinct scientific framework, holds potential to revolutionize OMFS. Its integration with advanced techniques promises personalized, less traumatic surgeries and improved patient care. The interdisciplinary synergy of chaos theory and emerging technologies presents a future in which OMFS practices become more efficient, less traumatic, and achieve a level of precision never seen before.

Health-related quality of life and satisfaction following orthognathic surgery: a prospective cohort study.

PURPOSE: This study investigates the motivations for orthognathic surgery and assesses the quality of life (QoL) and satisfaction among patients treated at a hospital over 12 months. METHODS: We employed an Arabic version of the Orthognathic Quality of Life Questionnaire (OQLQ), used pre-surgery and at 2 weeks, 3 months, and 6 months post-surgery. This included demographic data, the OQLQ, and visual analogue scales (VAS). The OQLQ, originally by Cunningham et al., was translated and adapted by Al-Asfour et al. Additional validated questions were added to both pre- and post-operative surveys. RESULTS: Of 136 participants (51 males, 85 females, average age 25.1), most underwent surgery for facial aesthetics (85.2%) and bite correction (57.3%). Treatments included various osteotomies. OQLQ scores significantly dropped from 63.3% pre-surgery to 23% at 6 months, showing QoL improvement. 97.8% reported better psychological status post-surgery (p = 0.0001), with 94.1% satisfaction at 6 months (p = 0.0001). CONCLUSION: The orthognathic surgery yielded positive outcomes in functional and psychological aspects, leading to high satisfaction and improved QoL in patients with dentofacial deformity.

Patient-Reported Outcomes of Maxillomandibular Surgery for Obstructive Sleep Apnea Treatment: A Scoping Review.

(1) Background: The present scoping review aims to scrutinize all existing patient-reported outcomes and assess the perspectives of obstructive sleep apnea patients after maxillomandibular surgery. (2) Methods: The review was carried out according to the extensions for scoping reviews using the PRISMA-ScR guidelines. Several databases were used to carry out the initial search. This study included randomized controlled trials, cohort studies, cross-sectional and case-control studies. The included studies considered patients with obstructive sleep apnea who were submitted to orthognathic surgery as the main subjects, and the patient's perception of quality of life, satisfaction, treatment experience and side effects were assessed. (3) Results: From 1407 examined articles, a total of 16 were included. Most of the included studies used more than one questionnaire to assess quality of life, except for five articles. The most commonly referred instruments were the Epworth Sleepiness Scale, SF-36, the Functional Outcomes of Sleep and Ottawa Sleep Apnea. The most commonly assessed outcomes were sleep quality, daytime function, facial aesthetics, dental function and emotional health. (4) Conclusions: The number of variables that can be evaluated from a patient's perspective are endless, as are the tools available to assess them. Not all of these tools, which are generally questionnaires, assess all the various outcomes, and some do not compare the pre- and post-surgical situations. Most of them are generic and lack specificity for obstructive sleep apnea.

The Use of Clear Aligners in Multi-Segmental Maxillary Surgery: A Case-Control Study in Cleft Lip and Palate and Skeletal Class III Patients.

Background: Maxillary hypoplasia and mandibular asymmetry may be corrected with orthognathic surgery after growth completion. For most stable results, some cases may require segmental Le Fort I osteotomies. Unfortunately, Invisalign's software (6.0 version) still has some inherent limitations in predicting outcomes for complex surgeries. This study explores the potential of aligners, particularly in multiple-piece maxillary osteotomies in both cleft and non-cleft patients. Method: Thirteen patients who underwent pre-surgical treatment with Invisalign were retrospectively matched in terms of diagnosis, surgical procedure, and orthodontic complexity with thirteen patients treated using fixed appliances. Virtual curves following the lower arch were employed to guide the correct pre-surgical positions of the upper teeth with a simple superimposition technique. The amount of impressions required in both groups to achieve satisfactory pre-surgical alignment of the segmented arches was compared. Results: one or no refinement phases were needed in the Invisalign group to reach an acceptable pre-surgical occlusion, while the amount of pre-surgical impressions needed to reach adequate coordination with fixed appliance treatment was slightly higher (p > 0.05). Conclusions: it appears that clear aligner could serve as an effective treatment for individuals necessitating segmental Le Fort I osteotomies when aided by the suggested simple superimposition approach.

Air Embolism-Induced Ischemic Stroke Following Orthognathic Surgery in a Patient With Goldenhar Syndrome.

Goldenhar syndrome, a rare congenital anomaly, manifests as craniofacial malformations often necessitating intricate surgical interventions. These procedures, though crucial, can expose patients to diverse postoperative complications, including hemorrhage or infection. A noteworthy complication is stroke, potentially linked to air embolism or local surgical trauma. We highlight a case of a male patient, aged 20 years, who experienced a significant postoperative complication of an ischemic stroke, theorized to be due to an air embolism, after undergoing orthognathic procedures for Goldenhar syndrome. The patient was subjected to LeFort I maxillary osteotomy, bilateral sagittal split ramus osteotomy of the mandible, and anterior iliac crest bone grafting to the right maxilla. He suffered an acute ischemic stroke in the left thalamus post-surgery, theorized to stem from an air embolism. Advanced imaging demonstrated air pockets within the cavernous sinus, a rare and concerning finding suggestive of potential air embolism. This case underscores the intricate challenges in treating Goldenhar syndrome patients and the rare but significant risk of stroke due to air embolism or surgical trauma. Limited literature on managing air embolism complications specific to Goldenhar syndrome surgeries exists. Generally, management includes immediate recognition, positional adjustments, air aspiration via central venous catheters, hyperbaric oxygen therapy, hemodynamic support, and high-flow oxygen administration to expedite air resorption. Our patient was conservatively managed post-surgery, and at a 3-month neurology follow-up, he showed significant improvement with only residual right arm weakness. It emphasizes the imperative of a comprehensive, multidisciplinary approach.

Tongue pressure and maxillofacial muscle activities during swallowing in patients with mandibular prognathism.

BACKGROUND: Coordination among lip, cheek and tongue movements during swallowing in patients with mandibular prognathism remains unclear. OBJECTIVES: This study aimed to identify the temporal sequences of tongue pressure and maxillofacial muscle activities during swallowing in patients with mandibular prognathism and compared characteristics with those of healthy volunteers. METHODS: Seven patients with mandibular prognathism (mandibular prognathism group) and 25 healthy volunteers with individual normal occlusion (control group) were recruited. Tongue pressures and masseter, orbicularis oris, mentalis and supra- and infrahyoid muscle activities while swallowing gel were measured simultaneously using a sensor sheet system with five measurement points and surface electromyography, respectively. Onset time, offset time and durations of tongue pressure and muscle activities were analysed. RESULTS: In the mandibular prognathism group, tongue pressure was often produced first in more peripheral parts of the palate. Offset of tongue pressure in the posteromedian and peripheral parts of the palate and maxillofacial muscle activities except for orbicularis oris were delayed. Duration of tongue pressure in the anteromedian part of the palate was significantly shorter and durations of masseter, mentalis and suprahyoid muscle activities were significantly longer. Times to onset of orbicularis oris and suprahyoid muscle activities based on first onset of tongue pressure were significantly shorter. CONCLUSION: These results suggest that patients with mandibular prognathism may exhibit specific patterns of tongue pressure production and maxillofacial muscle activities during swallowing.

Impacts of mandibular setback with or without maxillary advancement for class III skeletal correction on sleep-related respiratory parameters: A systematic review and meta-analysis.

A systematic review and meta-analysis was conducted to evaluate the impacts of mandibular setback with or without maxillary advancement for class III skeletal correction on respiratory parameters measured by polysomnography (PSG) and to compare these respiratory parameters between these procedures for class III skeletal correction. Six electronic databases were searched up to June 2023. Studies comparing PSG parameters before and after orthognathic surgery for skeletal class III patients were selected for further analysis. The outcomes of interest were apnoea-hypopnea index (AHI), respiratory disturbance index (RDI), the lowest oxygen saturation (lowest SpO2), the average oxygen saturation (mean SpO2), and the 3% oxygen desaturation index (3% ODI). Data extraction, methodological quality assessment, risk of bias assessment, meta-analysis, and subgroup analysis were performed. Sixteen studies with a total of 476 patients who underwent orthognathic surgery for class III skeletal correction were included for meta-analysis. The risk of bias level was moderate for most studies. All PSG parameters before and after orthognathic surgery were not significantly different. The different surgical procedures also did not significantly affect post-operative PSG parameters. 5.8% of patients developed post-operative obstructive sleep apnoea (OSA). Most of them underwent a large distance of mandibular setback. There is a moderate level of evidence that mandibular setback with or without maxillary advancement for class III skeletal correction does not pre-dispose young and healthy patients to obstructive sleep apnoea when evaluated in the short term after surgery. However, post-operatively developed OSA was found in several isolated cases that underwent a large amount of mandibular setback with or without maxillary advancement.

Frontal facial analysis of female celebrity attractiveness standards through artificial intelligence.

The contemporary significance of celebrities' facial aesthetics underscores their heightened importance in shaping attractiveness standards. This retrospective study aimed to investigate the impact of patterns on aesthetic canons in the profile views of female celebrities, using artificial intelligence. The study sought to compare different races and propose standards for attractive faces. In this retrospective cohort study, a Python-based algorithm was used to analyze frontal patterns and evaluate their influence on aesthetic norms in publicly accessible images of female global celebrities. Ten ideal angular or proportional measures were gathered from the literature, and were trained to serve as a benchmark for the analysis of facial attractiveness. Demographic characteristics were described statistically. A one-way ANOVA test was employed to assess data distribution. Differences in means between groups were evaluated using nonparametric independent-sample tests, with statistical significance set at < 0.05. The study involved facial analyses for 115 female celebrities. It revealed variations in facial features among races. The mean golden ratio differed, with African and Asian individuals showing lower ratios. Symmetry varied, with Latin and Caucasian faces considered the most symmetrical. The zygomatic-to-mandibular width ratio was similar across races, with a ratio close to 80% being associated with more attractive faces. Differences in nose-to-mouth ratio, lips, alar base width, and chin angle were noted among race groups. The study concluded that, regardless of race, an attractive female face is characterized by specific ratios and angles. Facial symmetry, though desirable, is not strictly necessary. Irrespective of race background, an appealing female face is characterized by a zygomatic-to-mandibular width ratio nearing 80%, a mid-facial third that is slightly larger than the lower third, and a distinctive chin angle of approximately 138°, contributing to a trapezoidal facial shape. The findings contribute valuable insights into attractiveness standards and the impact of frontal patterns on aesthetic canons in female celebrities.

Which factors affect the lingual fracture pattern in sagittal split ramus osteotomy?

The purpose of this study was to elucidate the effects of mandibular anatomy and osteotomy technique on lingual fracture patterns in SSRO. The predictor variables were: length of horizontal medial osteotomy; type of border osteotomy; buccolingual width; and vertical length of the basal cortex. The outcome variable was the type of lingual split pattern. This was categorized into four types according to a lingual split scale (LSS): LSS 1, true Hunsuck; LSS 2, fracture line to posterior border of the ramus; LSS 3, through to mandibular canal; LSS 4, unfavorable fracture pattern. Data were analyzed using analysis of variance and the Pearson χ2 test. Values of p < 0.05 were considered statistically significant. The study sample comprised 312 lingual split patterns in 156 patients. The most common type of lingual split pattern was LSS 1 (n = 204). There was a significant relationship between inferior border osteotomy type and LSS type (p = 0.001). Whilst LSS 1 was the most common among all border osteotomy types. LSS 4 was most frequently observed in cases where the lower border osteotomy remained in the buccal surface. According to the results of this study, the likelihood of an unfavorable split pattern increases when the lower border osteotomy remains in the buccal surface.

A Comparative Analysis of Skeletal and Dental Parameters in Bilateral Cleft Lip and Palate vs. Non-bilateral Cleft Lip and Palate Patients in the Central Indian Population: A NemoCeph Study.

Introduction Orthodontic diagnosis and treatment planning encounter distinctive complexities when dealing with cleft lip and palate anomalies. This research endeavors to thoroughly examine skeletal and dental characteristics through cephalometric analyses among individuals with bilateral cleft lip and palate (BCLP) within the central Indian population. Due to anatomical variations and growth constraints, traditional cephalometric mean values derived from standard population studies are often inadequate for these cases. Advanced technology, such as NemoCeph (Nemotech, Madrid, Spain) software, enhances measurement accuracy. Methods Fifty patients, including 25 with BCLP and 25 without BCLP, aged 10 to 18, were selected for this cross-sectional study. Lateral cephalograms were traced and analyzed using NemoCeph software. Skeletal and dental parameters were measured, and a comparison was made between BCLP patients and the general population. Statistical analysis was conducted using the Student's unpaired t-test. Both SPSS Statistics Version 24.0 (IBM Corp., Armonk, NY, USA) and GraphPad Prism Version 7.0 (GraphPad Software, San Diego, CA, USA) were used for data analysis. Results The investigation revealed significant disparities across several parameters, including sella-nasion-A point angle (SNA), sella-nasion-B point angle (SNB), A point-nasion-B point angle (ANB), the inter-incisal angle (the angle between the long axes of the upper and lower incisors), and UP 1 to A-pog (a specific vertical measurement between anatomical markers labeled "upper 1" and "A point to pogonion"), with associated p-values for the skeletal and dental parameters of 0.310, 0.259, 0.195, 0.0001, and 0.0001, respectively. A comparison between manual tracing and digital methods indicated a reduction in errors and an improvement in measurement precision. Notably, patients diagnosed with BCLP exhibited distinctive skeletal and dental traits, highlighting the necessity for tailored treatment approaches. Conclusion This study emphasizes the importance of personalized cephalometric evaluations for patients with BCLP. Standard mean values may not be applicable due to unique anatomical considerations in these cases. Advanced technology and patient-specific assessments are crucial for accurate diagnosis, treatment planning, and orthognathic procedures in individuals with cleft lip and palate conditions. Embracing digital tools and tailored approaches can enhance patient care quality and lead to better clinical outcomes.

Investigation of orthognathic surgery indicators-combination with index of orthognathic functional treatment needs (IOFTN) and maxillofacial morphometric analysis.

PURPOSE: The aim of this retrospective study was to determine orthognathic surgery indicators for Japanese patients with jaw deformities using both Index of Orthognathic Functional Treatment Needs (IOFTN) and maxillofacial morphometric analysis. SUBJECTS AND METHODS: The subjects were 89 patients treated with orthognathic surgery and 92 patients treated with orthodontic treatment alone, and were classified as class I, II, or III according to the ANB angle. Based on the results for IOFTN and the results of cephalometric analysis, the indication criteria for orthognathic surgery were examined. RESULTS: In IOFTN analysis, none of patients in the orthognathic surgery group were classified as category 1 or 2, while 48% of the patients in the orthodontic treatment group were classified as category 4 or 5. The results of the cephalometric analysis of patients in classified categories 4 and 5 showed that the orthognathic surgery group had significantly greater lateral mandibular deviation in Class I cases, significantly more severe degree of mandibular retrusion in Class II cases, and significantly more severe degree of mandibular prognathism in Class III cases. The results of the logistic regression analysis showed that IOFTN was a common variable as an indication criterion for orthognathic surgery, and several different variables were also selected from the cephalometric measurements in each group. CONCLUSION: IOFTN is a highly sensitive and useful indicator as a criterion for orthognathic surgery. However, in the choice of treatment strategy, maxillofacial morphometric analyses and the patient's desired goal are important.